EPDs

All

Showing 1–12 of 342 results

  • Yurtbay Seramik Porcelain Tile with Water Absorption 3% ≤ E ≤ 6%

    Read more
     

    English EPD Document

    EPD document prepared for Yurtbay Porcelain Tile with Water Absorption 3% ≤ E ≤ 6% with registration number S-P-04823 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Yurtbay Porcelain Tile is mainly produced from clay, kaolin and other raw materials as is shown in the product composition table. The porcelain tiles are served to the customer as packed which are recycleable cardboards and plastics. UN CPC code for Yurtbay Ceramic Porcelain Tiles is 37310. Porcelain tiles are used in many areas of life. It can be used in all type of buildings. They generally used for interior decoration, with its production in various colors and patterns and in different sizes. YURTBAY SERAMİK The founder of Yurtbay Group of Companies, Mr. Zeki Yurtbay, acquired his first experiences in trading at the dry goods shop owned by his father. As the first steps in his long-term experience in brick production started, he took over the brick production initiative merely at the age of 14 and successfully continued to manage the task he inherited in 1951 from his father. Although he lost the brick factory several times which was founded in 1955 and in Zonguldak, he did not give up. In 1970, he set up new and modern facilities. The investments by Mr. Zeki Yurtbay were not limited to Çaycuma, and he first became the partner and then the owner of Delta Brick Factory. The following process started with the recognition of Yurtbay Family in the global economy with its well-established industrial history, and its initial step into the ceramics industry. In 1995, Yurtbay Seramik Eskişehir Plant was established with 700 thousand square meters outdoors and 100 thousand square meters indoors production capacity. With the “Quality First” strategy and understanding, the production increased at a steady pace over the years has reached 25 million square meters production/year. As a result, export operations to 56 countries are ongoing. Yurtbay has started to work with the biggest global and foreign sales chains and have reached higher growth rates across the sector. The key to this international success has been “No compromise on quality, the right product and production at global standards”. With its reliability, Yurtbay Seramik is the pioneer and founder of many years of cooperation at home. Making domestic sales via 5 regional directorates located in Istanbul, Ankara, Adana, Antalya and Izmir, Yurtbay Seramik continued its operations to increase the number of its stores and further expand its network. Reflecting its dynamic structure through its projects, Yurtbay Seramik continues to bring added value to the industry and carry its brand image one step further by coming up with aesthetic and eco-friendly solutions.  
    View product
  • Yurtbay Seramik Porcelain Tile with Water Absorption E ≤ 0.5%

    Read more
     

    English EPD Document

    EPD document prepared for Yurtbay Porcelain Tile with Water Absorption E ≤ 0.5% with registration number S-P-04822 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Yurtbay Porcelain Tile is mainly produced from clay, kaolin and other raw materials as is shown in the product composition table. The porcelain tiles are served to the customer as packed which are recyclable cardboards and plastics. UN CPC code for Yurtbay Ceramic Porcelain Tiles is 37310. Porcelain tiles are used in many areas of life. It can be used in all type of buildings. They generally used for interior decoration, with its production in various colors and patterns and in different sizes. YURTBAY SERAMİK The founder of Yurtbay Group of Companies, Mr. Zeki Yurtbay, acquired his first experiences in trading at the dry goods shop owned by his father. As the first steps in his long-term experience in brick production started, he took over the brick production initiative merely at the age of 14 and successfully continued to manage the task he inherited in 1951 from his father. Although he lost the brick factory several times which was founded in 1955 and in Zonguldak, he did not give up. In 1970, he set up new and modern facilities. The investments by Mr. Zeki Yurtbay were not limited to Çaycuma, and he first became the partner and then the owner of Delta Brick Factory. The following process started with the recognition of Yurtbay Family in the global economy with its well-established industrial history, and its initial step into the ceramics industry. In 1995, Yurtbay Seramik Eskişehir Plant was established with 700 thousand square meters outdoors and 100 thousand square meters indoors production capacity. With the “Quality First” strategy and understanding, the production increased at a steady pace over the years has reached 25 million square meters production/year. As a result, export operations to 56 countries are ongoing. Yurtbay has started to work with the biggest global and foreign sales chains and have reached higher growth rates across the sector. The key to this international success has been “No compromise on quality, the right product and production at global standards”. With its reliability, Yurtbay Seramik is the pioneer and founder of many years of cooperation at home. Making domestic sales via 5 regional directorates located in Istanbul, Ankara, Adana, Antalya and Izmir, Yurtbay Seramik continued its operations to increase the number of its stores and further expand its network. Reflecting its dynamic structure through its projects, Yurtbay Seramik continues to bring added value to the industry and carry its brand image one step further by coming up with aesthetic and eco-friendly solutions.  
    View product
  • Yurtbay Seramik Wall Tile

    Read more
     

    English EPD Document

    EPD document prepared for Yurtbay Seramik Wall Tile with registration number S-P-04821 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Yurtbay Ceramic Wall Tile is mainly produced from clay, kaolin, calcite and other raw materials as is shown in the product composition table. The wall tiles are served to the customer as packed which are recyclable cardboards and plastics. UN CPC code for Yurtbay Ceramic Wall Tiles is 37310. Ceramic wall tiles are used in many areas of life. It can be used in all type of buildings. They generally used for interior decoration, with its production in various colors and patterns and in different sizes. YURTBAY SERAMİK The founder of Yurtbay Group of Companies, Mr. Zeki Yurtbay, acquired his first experiences in trading at the dry goods shop owned by his father. As the first steps in his long-term experience in brick production started, he took over the brick production initiative merely at the age of 14 and successfully continued to manage the task he inherited in 1951 from his father. Although he lost the brick factory several times which was founded in 1955 and in Zonguldak, he did not give up. In 1970, he set up new and modern facilities. The investments by Mr. Zeki Yurtbay were not limited to Çaycuma, and he first became the partner and then the owner of Delta Brick Factory. The following process started with the recognition of Yurtbay Family in the global economy with its well-established industrial history, and its initial step into the ceramics industry. In 1995, Yurtbay Seramik Eskişehir Plant was established with 700 thousand square meters outdoors and 100 thousand square meters indoors production capacity. With the “Quality First” strategy and understanding, the production increased at a steady pace over the years has reached 25 million square meters production/year. As a result, export operations to 56 countries are ongoing. Yurtbay has started to work with the biggest global and foreign sales chains and have reached higher growth rates across the sector. The key to this international success has been “No compromise on quality, the right product and production at global standards”. With its reliability, Yurtbay Seramik is the pioneer and founder of many years of cooperation at home. Making domestic sales via 5 regional directorates located in Istanbul, Ankara, Adana, Antalya and Izmir, Yurtbay Seramik continued its operations to increase the number of its stores and further expand its network. Reflecting its dynamic structure through its projects, Yurtbay Seramik continues to bring added value to the industry and carry its brand image one step further by coming up with aesthetic and eco-friendly solutions.  
    View product
  • Fırat Plastik Laminated PVC Profiles

    Read more

    English EPD Document

      EPD document prepared for Fırat Plastik Laminated PVC Profile with registration number S-P-04135 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. The following Laminated PVC windows and doors profiles are covered under this Environmental Product Declaration. PVC windows and door profiles include the following series: Diamond60, Opal70, Garnet70, Garnet70 Selective, Garnet70 Strong, Garnet70 Strong Selective, Selenit75, Selenit75 Selective, Selenit75 Strong, Selenit75 Strong Selective, Elegane80, Elegance80 Selective, Redonit85, Zenia Slide, and Andes Slide. These series are placed on the market under three different brands owned by Fırat, namely Fıratpen, Gedizpen and Winhouse. The raw material compositions of Laminated PVC Windows and Doors Profiles are shown below. Laminated PVC Profiles along with the auxiliary profiles are mainly made of Polyvinyl Chloride (PVC) known as the most valuable raw material within the chemical industry. These products may also contain other raw materials such as acrylic impact modifiers, stabilizers, and calcium carbonate. For lamination, primer, adhesive, and laminate are also used. The compositions of these products are shown below. FIRAT PLASTİK  Fırat Plastik Kauçuk Sanayi ve Ticaret AŞ, was established in 1972 to carry out production in the field of plastic building materials. Fırat, which always sets out with the principles of quality production and product diversity, has succeeded in becoming both the leading establishment of the sector and the export leader of the sector because of significant investments that have taken years. In its production, Fırat targets various sectors such as construction, agriculture, automotive, medical, domestic appliances sectors with its plastic-based products. It realizes its production targeting those sectors in its modern factories in Büyükçekmece - İstanbul and Sincan-Ankara which have a total area that reaches 750,000 m2 with its expert staff and is one of three biggest plastic production complexes in Europe. Fırat, which adopted sustainability and producing more ecologic and innovative products to leave more livable environment to future generations, is the leader and pioneering company in PVC window sector.      
    View product
  • Fırat Plastik White PVC Profiles

    Read more

    English EPD Document

      EPD document prepared for Fırat Plastik White PVC Profile with registration number S-P-04134 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. The following White PVC windows and doors profiles are covered under this Environmental Product Declaration. PVC windows and door profiles includes the following series: Diamond60, Opal70, Garnet70, Garnet70 Selective, Garnet70 Strong, Garnet70 Strong Selective, Selenit75, Selenit75 Selective, Selenit75 Strong, Selenit75 Strong Selective, Elegane80, Elegance80 Selective, Redonit85, Zenia Slide, and Andes Slide. These series are placed on the market under three different brands owned by Fırat, namely Fıratpen, Gedizpen and Winhouse. The raw material compositions of White PVC Windows and Doors Profiles are shown below. White PVC Profiles along with the auxiliary profiles are mainly made of Polyvinyl Chloride (PVC) known as the most valuable raw material within the chemical industry. White PVC profiles may also contain other raw materials such as acrylic impact modifiers, stabilizers, and calcium carbonate. The compositions of White PVC Profiles are shown below. These special mixture recipes used in production is acrylic-based, resistant to different climatic conditions and impacts, and is an environmentally friendly material with lead-free calcium zinc and low calcite content. PVC Profiles are mainly made of Polyvinyl Chloride (PVC) known as the most valuable raw material within the chemical industry. Products may also contain other raw materials such as acrylic impact modifiers, stabilizers and calcium carbonate. The use of PVC is predominant in the home construction industry. It is regularly used as a replacement or alternative to metal pipes and in many applications where corrosion can compromise functionality and increase maintenance costs. In addition to residential applications, PVC is routinely used for municipal, industrial, military and commercial projects. FIRAT PLASTİK  Fırat Plastik Kauçuk Sanayi ve Ticaret AŞ, was established in 1972 to carry out production in the field of plastic building materials. Fırat, which always sets out with the principles of quality production and product diversity, has succeeded in becoming both the leading establishment of the sector and the export leader of the sector because of significant investments that have taken years. In its production, Fırat targets various sectors such as construction, agriculture, automotive, medical, domestic appliances sectors with its plastic-based products. It realizes its production targeting those sectors in its modern factories in Büyükçekmece - İstanbul and Sincan-Ankara which have a total area that reaches 750,000 m2 with its expert staff and is one of three biggest plastic production complexes in Europe. Fırat, which adopted sustainability and producing more ecologic and innovative products to leave more livable environment to future generations, is the leader and pioneering company in PVC window sector.      
    View product
  • Asaş A2 Aluminium Composite Panel

    Read more

    English EPD Document

      EPD document prepared for Asaş A2 Aluminium Composite Panel with registration number S-P-04802 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Aluminum composite panels, also called as ACPs, ACP is an external building cladding material used to create great-looking and durable facades. It consists of two thin powder coated aluminum sheets bonded to a mineral core. A core can be made of an aluminum, mineral, or a thermoplastic polymer, provide bonding of two powder coated aluminum sheets. Aluminum composite panels has been used in facade cladding for the construction sector because of their light weight and strength, enriching living quarters with internal and external cladding and other special design and production solutions. It provides a wide range of application choices to designer, especially for skyscrapers, custom design modern architectural buildings and airports. It’s great versatility allows the panel to be used as a combination with other materials to cover certain areas of a facade or as the main element in complicated transformations. Since the aluminum composite panel began its journey in the construction sector, its characteristics have been improving until it has become a highly modifiable product, which admits different forms of assembly, colours, transformations and uses. The used material is economical when it is compared with other choices. The other advantage is that ACP is resistant in terms of stain, UV, chemical, weather, termite, and fungi. Aluminum composite panels require significantly less maintenance than other similar products (such as FC Sheet) due to its PVDF coating and finish. The core material and cover sheets of aluminum composite panel can be recycled and reused. Due to its characteristics, aluminium can be recycled indefinitely. ASAŞ aluminum composite panel products; while providing solutions on facade cladding systems for the construction industry, adds value to living spaces with design and production solutions for industrial and architectural interior - exterior cladding and other special applications. Composite panels produced within ASAŞ; is assured in quality with high quality PVDF painted aluminum sheet and mineral core in accordance with TS EN 13501 standard. Aluminum composite panels with aluminum hydroxide filling have LDPE and AL(OH) filling material. In the case of the A2 panel, this is a non-combustible panel composed of a mineral core developed to meet the highest regulatory requirements of fire classification. Aluminum hydroxide core panels reaction to o fire classification A2-s1, d0 (according to UNE EN 13501-1:2007), makes it the ideal cladding solution for high-rise buildings and high occupancy. The composite panel is produced by a continuous lamination process, in which a sheet of the material that will make up the core is extruded and compacted between two aluminum sheets that are unwound at the same time. Finally, the flatness of the material is compacted and perfected and a protective film is applied.   ASAŞ Based on its stable financial growth trend since its establishment in 1990, ASAŞ is one of the leading manufacturers in Europe and exports to more than 90 countries across 6 continents. With over 3000 employees, ASAŞ provides services for its clients at its Aluminium Extrusion Profile, Aluminium Composite Panel, Aluminium Flat Rolled Products, PVC Profile and Roller Shutter production facilities which are located in a total of 923.000 m² area, of which 300.000 m² is enclosed, in Turkey. Company offers the advantage of keeping all processes under control both in terms of quality & cost and getting service from a single point with its fully integrated manufacturing facilities which combines all the production functions that customers needed in the supply chain. ASAS GmbH, sub company of ASAŞ, serves as a logistics and service center with 72.793m² closed area in neighboring Koblenz city of Neuwied, Germany.   Passion of "Adding Value" to every job it does, the sector and the society in which it operates and sustainability is at the heart of ASAŞ's business philosophy. Corporate social responsibility projects are carried out with this philosophy to strengthen the society. ASAŞART, which is positioned as an "Art Production Center, operates as a learning+ sharing+ designing+ production platform that brings art and design students together with academics and professionals. Within ASAŞART, special projects are developed to support young talents in their art carrier; aluminium sculpture contest, training programs with universities, international workshops and art exhibitions are organized. Children are at the center of ASAS’ corporate social responsibility projects. Company established ASAS Basketball Club so as to support children to be successful individuals in the future with sports as well as social and educational activities.   ASAŞ positions itself as a solution partner with a passion of trying to foresee the future trends by following the innovations and always offering the best for its customers by investing in technology. Therefore, while making investments company adopts the principles of “continuous investment in sustainability, technology, integration and innovation” to always serve its customers better. With this perspective, company established the first R & D Center in aluminium sector in Turkey. Alloy development, process development and product development studies are carried out under the umbrella of R&D Center. Company develops projects to use its resources more efficiently and grows with environment friendly investments. Besides these, ASAŞ takes part in international projects to contribute the development of new processes that helps to minimize the environmental impact of the production processes and increase the energy efficiency.   ASAŞ produces wide range of value-added products for various sectors like automotive, railway, commercial vehicles, energy, packaging, construction, consumer products, maritime etc. worldwide. Finished and semi-finished products are produced to meet its customers’ needs in their own projects. Besides this, the company enrich its knowledge in the field of production with design & product development studies and offers its high-quality products to the market under its own brands. Aluminium architectural systems (door, window, and curtain wall systems), aluminum composite panels, u-PVC door and window systems, aluminum design products (aluminum flag and lighting poles, aluminum furniture etc.), roller shutter systems, garage doors and motor control systems are product groups that the company sells with its own brand.      
    View product
  • Asaş B1 Aluminium Composite Panel

    Read more

    English EPD Document

      EPD document prepared for Asaş B1 Aluminium Composite Panel with registration number S-P-04801 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Aluminum composite panels, also called as ACPs, ACP is an external building cladding material used to create great-looking and durable facades. It consists of two thin powder coated aluminum sheets bonded to a core made of fire retardant thermoplastic resinse with mineral charge. A core can be made of a aluminum, mineral, or a thermoplastic polymer, provide bonding of two powder coated aluminum sheets. Aluminum composite panels has been used in facade cladding for the construction sector because of their light weight and strength, enriching living quarters with internal and external cladding and other special design and production solutions. It provides a wide range of application choices to designer, especially for skyscrapers, custom design modern architectural buildings and airports. It’s great versatility allows the panel to be used as a combination with other materials to cover certain areas of a facade or as the main element in complicated transformations. Since the aluminum composite panel began its journey in the construction sector, its characteristics have been improving until it has become a highly modifiable product, which admits different forms of assembly, colours, transformations and uses. The used material is economical when it is compared with other choices. The other advantage is that ACP is resistant in terms of stain, UV, chemical, weather, termite, and fungi. Aluminum composite panels require significantly less maintenance than other similar products (such as FC Sheet) due to its PVDF coating and finish. The core material and cover sheets of aluminum composite panel can be recycled and reused. Due to its characteristics, alumnium can be recycled indefinitely. ASAŞ aluminum composite panel products; while providing solutions on facade cladding systems for the construction industry, adds value to living spaces with design and production solutions for industrial and architectural interior - exterior cladding and other special applications. Composite panels produced within ASAŞ; is assured in quality with high quality PVDF painted aluminum sheet and an interior fire-retardant core in accordance with UNE EN 13501 standard. The FR (Fire Retardant) type panels interior fire-retardant core is made of thermoplastic resins with mineral charge. Its reaction to fire classification B-s1, d0 (according to UNE EN 13501-1:2007), makes it a coating material that fulfils most of the architectural applications. The composite panel is produced by a continuous lamination process, in which a sheet of the material that will make up the core is extruded and compacted between two aluminum sheets that are unwound at the same time. Finally, the flatness of the material is compacted and perfected and a protective film is applied   ASAŞ Based on its stable financial growth trend since its establishment in 1990, ASAŞ is one of the leading manufacturers in Europe and exports to more than 90 countries across 6 continents. With over 3000 employees, ASAŞ provides services for its clients at its Aluminium Extrusion Profile, Aluminium Composite Panel, Aluminium Flat Rolled Products, PVC Profile and Roller Shutter production facilities which are located in a total of 923.000 m² area, of which 300.000 m² is enclosed, in Turkey. Company offers the advantage of keeping all processes under control both in terms of quality & cost and getting service from a single point with its fully integrated manufacturing facilities which combines all the production functions that customers needed in the supply chain. ASAS GmbH, sub company of ASAŞ, serves as a logistics and service center with 72.793m² closed area in neighboring Koblenz city of Neuwied, Germany.   Passion of "Adding Value" to every job it does, the sector and the society in which it operates and sustainability is at the heart of ASAŞ's business philosophy. Corporate social responsibility projects are carried out with this philosophy to strengthen the society. ASAŞART, which is positioned as an "Art Production Center, operates as a learning+ sharing+ designing+ production platform that brings art and design students together with academics and professionals. Within ASAŞART, special projects are developed to support young talents in their art carrier; aluminium sculpture contest, training programs with universities, international workshops and art exhibitions are organized. Children are at the center of ASAS’ corporate social responsibility projects. Company established ASAS Basketball Club so as to support children to be successful individuals in the future with sports as well as social and educational activities.   ASAŞ positions itself as a solution partner with a passion of trying to foresee the future trends by following the innovations and always offering the best for its customers by investing in technology. Therefore, while making investments company adopts the principles of “continuous investment in sustainability, technology, integration and innovation” to always serve its customers better. With this perspective, company established the first R & D Center in aluminium sector in Turkey. Alloy development, process development and product development studies are carried out under the umbrella of R&D Center. Company develops projects to use its resources more efficiently and grows with environment friendly investments. Besides these, ASAŞ takes part in international projects to contribute the development of new processes that helps to minimize the environmental impact of the production processes and increase the energy efficiency.   ASAŞ produces wide range of value-added products for various sectors like automotive, railway, commercial vehicles, energy, packaging, construction, consumer products, maritime etc. worldwide. Finished and semi-finished products are produced to meet its customers’ needs in their own projects. Besides this, the company enrich its knowledge in the field of production with design & product development studies and offers its high-quality products to the market under its own brands. Aluminium architectural systems (door, window, and curtain wall systems), aluminum composite panels, u-PVC door and window systems, aluminum design products (aluminum flag and lighting poles, aluminum furniture etc.), roller shutter systems, garage doors and motor control systems are product groups that the company sells with its own brand.      
    View product
  • Asaş B2 Aluminium Composite Panel

    Read more

    English EPD Document

      EPD document prepared for Asaş B2 Aluminium Composite Panel with registration number S-P-04800 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Aluminum composite panels, also called as ACPs, ACP is an external building cladding material used to create great-looking and durable facades. It consists of two thin powder coated aluminum sheets bonded to a non-aluminum core. A core can be made of an aluminum, mineral, or a thermoplastic polymer, provide bonding of two powder coated aluminum sheets. Aluminum composite panels has been used in facade cladding for the construction sector because of their light weight and strength, enriching living quarters with internal and external cladding and other special design and production solutions. It provides a wide range of application choices to designer, especially for skyscrapers, custom design modern architectural buildings and airports. It’s great versatility allows the panel to be used as a combination with other materials to cover certain areas of a facade or as the main element in complicated transformations. Since the aluminum composite panel began its journey in the construction sector, its characteristics have been improving until it has become a highly modifiable product, which admits different forms of assembly, colours, transformations and uses. The used material is economical when it is compared with other choices. The other advantage is that ACP is resistant in terms of stain, UV, chemical, weather, termite, and fungi. Aluminum composite panels require significantly less maintenance than other similar products (such as FC Sheet) due to its PVDF coating and finish. The core material and cover sheets of aluminum composite panel can be recycled and reused. Due to its characteristics, aluminum can be recycled indefinitely. ASAŞ aluminum composite panel products; while providing solutions on facade cladding systems for the construction industry, adds value to living spaces with design and production solutions for industrial and architectural interior - exterior cladding and other special applications. Composite panels produced within ASAŞ; is assured in quality with high quality PVDF painted aluminum sheet and LDPE resin in accordance with TS EN 13501 standard. Aluminum composite panels with conventional low density polyethylene filling consist of two powder coated aluminum sheets and a polyethylene core between these two sheets with a multiple colour. Polyethylene core panel is used in Type C construction projects, having B2 flammability class. The composite panel is produced by a continuous lamination process, in which a sheet of the material that will make up the core is extruded and compacted between two aluminum sheets that are unwound at the same time. Finally, the flatness of the material is compacted and perfected and a protective film is applied.   ASAŞ Based on its stable financial growth trend since its establishment in 1990, ASAŞ is one of the leading manufacturers in Europe and exports to more than 90 countries across 6 continents. With over 3000 employees, ASAŞ provides services for its clients at its Aluminium Extrusion Profile, Aluminium Composite Panel, Aluminium Flat Rolled Products, PVC Profile and Roller Shutter production facilities which are located in a total of 923.000 m² area, of which 300.000 m² is enclosed, in Turkey. Company offers the advantage of keeping all processes under control both in terms of quality & cost and getting service from a single point with its fully integrated manufacturing facilities which combines all the production functions that customers needed in the supply chain. ASAS GmbH, sub company of ASAŞ, serves as a logistics and service center with 72.793m² closed area in neighboring Koblenz city of Neuwied, Germany.   Passion of "Adding Value" to every job it does, the sector and the society in which it operates and sustainability is at the heart of ASAŞ's business philosophy. Corporate social responsibility projects are carried out with this philosophy to strengthen the society. ASAŞART, which is positioned as an "Art Production Center, operates as a learning+ sharing+ designing+ production platform that brings art and design students together with academics and professionals. Within ASAŞART, special projects are developed to support young talents in their art carrier; aluminium sculpture contest, training programs with universities, international workshops and art exhibitions are organized. Children are at the center of ASAS’ corporate social responsibility projects. Company established ASAS Basketball Club so as to support children to be successful individuals in the future with sports as well as social and educational activities.   ASAŞ positions itself as a solution partner with a passion of trying to foresee the future trends by following the innovations and always offering the best for its customers by investing in technology. Therefore, while making investments company adopts the principles of “continuous investment in sustainability, technology, integration and innovation” to always serve its customers better. With this perspective, company established the first R & D Center in aluminium sector in Turkey. Alloy development, process development and product development studies are carried out under the umbrella of R&D Center. Company develops projects to use its resources more efficiently and grows with environment friendly investments. Besides these, ASAŞ takes part in international projects to contribute the development of new processes that helps to minimize the environmental impact of the production processes and increase the energy efficiency.   ASAŞ produces wide range of value-added products for various sectors like automotive, railway, commercial vehicles, energy, packaging, construction, consumer products, maritime etc. worldwide. Finished and semi-finished products are produced to meet its customers’ needs in their own projects. Besides this, the company enrich its knowledge in the field of production with design & product development studies and offers its high-quality products to the market under its own brands. Aluminium architectural systems (door, window, and curtain wall systems), aluminum composite panels, u-PVC door and window systems, aluminum design products (aluminum flag and lighting poles, aluminum furniture etc.), roller shutter systems, garage doors and motor control systems are product groups that the company sells with its own brand.      
    View product
  • Asaş Aluminium Rollform

    Read more

    English EPD Document

      EPD document prepared for Asaş Aluminium Rollform with registration number S-P-04799 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Shutter systems are preferred more and more by users every year due to its benefits especially in summer and winter months in the interest of thermal insulation and safety. Along with classical designs, systems produced with new technologies in the recent period also give buildings an aesthetic appearance. Shutter systems produced in the Shutter and Shutter Production Facilities of ASAŞ, which attaches importance to R&D studies and won an award in this regard; helps to minimize the air conditioner consumption by blocking the sun rays in the summer months, and helps to reduce the heating costs by trapping the hot air inside for a long time in the winter months. Polyurethane-filled lamellas designed using aluminum sheets produced in the Aluminum Flat Products Production Facility, which continues its activities within ASAŞ, provide high thermal insulation and provide savings to users in the long term. ASAŞ has produced 37-39-43-55N-55S and 77 mm roller shutter and garage door slats with polyurethane filing by Aluminum Rollform technology which has high quality standards and advanced level. Aluminum Rollform can enhance functionality service, using in production of roof panels, window, and door. One of the most used rollform material is aluminum which can be used because of its lightweightness. Aluminum is corrosion resistant which means that it does not rust or corrode. Aluminum is greatly versatile so that it can effortlessly be bent, cut, and shaped into form. Also, aluminum rollforms have multiple colours according to clients. Roll forming technology has many advantages which are high production capability, higher strength of roll formed sections.   ASAŞ Based on its stable financial growth trend since its establishment in 1990, ASAŞ is one of the leading manufacturers in Europe and exports to more than 90 countries across 6 continents. With over 3000 employees, ASAŞ provides services for its clients at its Aluminium Extrusion Profile, Aluminium Composite Panel, Aluminium Flat Rolled Products, PVC Profile and Roller Shutter production facilities which are located in a total of 923.000 m² area, of which 300.000 m² is enclosed, in Turkey. Company offers the advantage of keeping all processes under control both in terms of quality & cost and getting service from a single point with its fully integrated manufacturing facilities which combines all the production functions that customers needed in the supply chain. ASAS GmbH, sub company of ASAŞ, serves as a logistics and service center with 72.793m² closed area in neighboring Koblenz city of Neuwied, Germany.   Passion of "Adding Value" to every job it does, the sector and the society in which it operates and sustainability is at the heart of ASAŞ's business philosophy. Corporate social responsibility projects are carried out with this philosophy to strengthen the society. ASAŞART, which is positioned as an "Art Production Center, operates as a learning+ sharing+ designing+ production platform that brings art and design students together with academics and professionals. Within ASAŞART, special projects are developed to support young talents in their art carrier; aluminium sculpture contest, training programs with universities, international workshops and art exhibitions are organized. Children are at the center of ASAS’ corporate social responsibility projects. Company established ASAS Basketball Club so as to support children to be successful individuals in the future with sports as well as social and educational activities.   ASAŞ positions itself as a solution partner with a passion of trying to foresee the future trends by following the innovations and always offering the best for its customers by investing in technology. Therefore, while making investments company adopts the principles of “continuous investment in sustainability, technology, integration and innovation” to always serve its customers better. With this perspective, company established the first R & D Center in aluminium sector in Turkey. Alloy development, process development and product development studies are carried out under the umbrella of R&D Center. Company develops projects to use its resources more efficiently and grows with environment friendly investments. Besides these, ASAŞ takes part in international projects to contribute the development of new processes that helps to minimize the environmental impact of the production processes and increase the energy efficiency.   ASAŞ produces wide range of value-added products for various sectors like automotive, railway, commercial vehicles, energy, packaging, construction, consumer products, maritime etc. worldwide. Finished and semi-finished products are produced to meet its customers’ needs in their own projects. Besides this, the company enrich its knowledge in the field of production with design & product development studies and offers its high-quality products to the market under its own brands. Aluminium architectural systems (door, window, and curtain wall systems), aluminum composite panels, u-PVC door and window systems, aluminum design products (aluminum flag and lighting poles, aluminum furniture etc.), roller shutter systems, garage doors and motor control systems are product groups that the company sells with its own brand.      
    View product
  • Asaş Laminated PVC Profile

    Read more

    English EPD Document

      EPD document prepared for Asaş Laminated PVC Profile with registration number S-P-04798 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Product description: PVC Profile Production Facilities; It was established in Akyazı, Sakarya in 1997 within the body of ASAŞ in order to meet the growing demand for high quality products in Turkey and the world market. PVC Profile and Shutter production facilities located in the same campus continue their activities on an area of 60.000 m², 30.000 m² of which is closed. The facility serves with an annual production capacity of 35,000 tons of PVC profiles. In ASAŞ PVC Profile Production Facilities, only European origin raw materials are used. PVC window profiles manufactured in ASAŞ include white and coloured profiles, where a percentage of the latter are laminated. These special mixture recipes used in production is acrylic-based, resistant to different climatic conditions and impacts, and is an environmentally friendly material with lead-free calcium zinc and low calcite content. PVC Profiles are mainly made of Polyvinyl Chloride (PVC) known as the most valuable raw material within the chemical industry. Lamination of PVC profile is mostly used at production of plastic windows by individual orders or in case when it is necessary to preserve the original look of the building facade. Lamination film is very strong, its outside is notable for high resistance to atmospheric impacts and UV-rays, and it keeps coloration brightness for long time. Such film can imitate the construction and colour of different kinds of wooden patterns.   ASAŞ Based on its stable financial growth trend since its establishment in 1990, ASAŞ is one of the leading manufacturers in Europe and exports to more than 90 countries across 6 continents. With over 3000 employees, ASAŞ provides services for its clients at its Aluminium Extrusion Profile, Aluminium Composite Panel, Aluminium Flat Rolled Products, PVC Profile and Roller Shutter production facilities which are located in a total of 923.000 m² area, of which 300.000 m² is enclosed, in Turkey. Company offers the advantage of keeping all processes under control both in terms of quality & cost and getting service from a single point with its fully integrated manufacturing facilities which combines all the production functions that customers needed in the supply chain. ASAS GmbH, sub company of ASAŞ, serves as a logistics and service center with 72.793m² closed area in neighboring Koblenz city of Neuwied, Germany.   Passion of "Adding Value" to every job it does, the sector and the society in which it operates and sustainability is at the heart of ASAŞ's business philosophy. Corporate social responsibility projects are carried out with this philosophy to strengthen the society. ASAŞART, which is positioned as an "Art Production Center, operates as a learning+ sharing+ designing+ production platform that brings art and design students together with academics and professionals. Within ASAŞART, special projects are developed to support young talents in their art carrier; aluminium sculpture contest, training programs with universities, international workshops and art exhibitions are organized. Children are at the center of ASAS’ corporate social responsibility projects. Company established ASAS Basketball Club so as to support children to be successful individuals in the future with sports as well as social and educational activities.   ASAŞ positions itself as a solution partner with a passion of trying to foresee the future trends by following the innovations and always offering the best for its customers by investing in technology. Therefore, while making investments company adopts the principles of “continuous investment in sustainability, technology, integration and innovation” to always serve its customers better. With this perspective, company established the first R & D Center in aluminium sector in Turkey. Alloy development, process development and product development studies are carried out under the umbrella of R&D Center. Company develops projects to use its resources more efficiently and grows with environment friendly investments. Besides these, ASAŞ takes part in international projects to contribute the development of new processes that helps to minimize the environmental impact of the production processes and increase the energy efficiency.   ASAŞ produces wide range of value-added products for various sectors like automotive, railway, commercial vehicles, energy, packaging, construction, consumer products, maritime etc. worldwide. Finished and semi-finished products are produced to meet its customers’ needs in their own projects. Besides this, the company enrich its knowledge in the field of production with design & product development studies and offers its high-quality products to the market under its own brands. Aluminium architectural systems (door, window, and curtain wall systems), aluminum composite panels, u-PVC door and window systems, aluminum design products (aluminum flag and lighting poles, aluminum furniture etc.), roller shutter systems, garage doors and motor control systems are product groups that the company sells with its own brand.      
    View product
  • Asaş PVC Profile

    Read more

    English EPD Document


    EPD document prepared for Asaş PVC Profile with registration number S-P-04797 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.

    PVC Profile Production Facilities; It was established in Akyazı, Sakarya in 1997 within the body of ASAŞ in order to meet the growing demand for high quality products in Turkey and the world market. PVC Profile and Shutter production facilities located in the same campus continue their activities on an area of 60.000 m², 30.000 m² of which is closed. The facility serves with an annual production capacity of 35,000 tons of PVC profiles. In ASAŞ PVC Profile Production Facilities, only European origin raw materials are used. PVC window profiles manufactured in ASAŞ include white and coloured profiles, where a percentage of the latter are laminated.

    These special mixture recipes used in production is acrylic-based, resistant to different climatic conditions and impacts, and is an environmentally friendly material with lead-free calcium zinc and low calcite content.

    PVC Profiles are mainly made of Polyvinyl Chloride (PVC) known as the most valuable raw material within the chemical industry. Products may also contain other raw materials such as acrylic impact modifiers, stabilizers and calcium carbonate.

    The use of PVC is predominant in the home construction industry. It is regularly used as a replacement or alternative to metal pipes and in many applications where corrosion can compromise functionality and increase maintenance costs. In addition to residential applications, PVC is routinely used for municipal, industrial, military and commercial projects.

    ASAŞ 

    Based on its stable financial growth trend since its establishment in 1990, ASAŞ is one of the leading manufacturers in Europe and exports to more than 90 countries across 6 continents. With over 3000 employees, ASAŞ provides services for its clients at its Aluminium Extrusion Profile, Aluminium Composite Panel, Aluminium Flat Rolled Products, PVC Profile and Roller Shutter production facilities which are located in a total of 923.000 m² area, of which 300.000 m² is enclosed, in Turkey. Company offers the advantage of keeping all processes under control both in terms of quality & cost and getting service from a single point with its fully integrated manufacturing facilities which combines all the production functions that customers needed in the supply chain. ASAS GmbH, sub company of ASAŞ, serves as a logistics and service center with 72.793m² closed area in neighboring Koblenz city of Neuwied, Germany.


    Passion of "Adding Value" to every job it does, the sector and the society in which it operates and sustainability is at the heart of ASAŞ's business philosophy. Corporate social responsibility projects are carried out with this philosophy to strengthen the society. ASAŞART, which is positioned as an "Art Production Center, operates as a learning+ sharing+ designing+ production platform that brings art and design students together with academics and professionals. Within ASAŞART, special projects are developed to support young talents in their art carrier; aluminium sculpture contest, training programs with universities, international workshops and art exhibitions are organized. Children are at the center of ASAS’ corporate social responsibility projects. Company established ASAS Basketball Club so as to support children to be successful individuals in the future with sports as well as social and educational activities.


    ASAŞ positions itself as a solution partner with a passion of trying to foresee the future trends by following the innovations and always offering the best for its customers by investing in technology. Therefore, while making investments company adopts the principles of “continuous investment in sustainability, technology, integration and innovation” to always serve its customers better. With this perspective, company established the first R & D Center in aluminium sector in Turkey. Alloy development, process development and product development studies are carried out under the umbrella of R&D Center. Company develops projects to use its resources more efficiently and grows with environment friendly investments. Besides these, ASAŞ takes part in international projects to contribute the development of new processes that helps to minimize the environmental impact of the production processes and increase the energy efficiency.


    ASAŞ produces wide range of value-added products for various sectors like automotive, railway, commercial vehicles, energy, packaging, construction, consumer products, maritime etc. worldwide. Finished and semi-finished products are produced to meet its customers’ needs in their own projects. Besides this, the company enrich its knowledge in the field of production with design & product development studies and offers its high-quality products to the market under its own brands. Aluminium architectural systems (door, window, and curtain wall systems), aluminum composite panels, u-PVC door and window systems, aluminum design products (aluminum flag and lighting poles, aluminum furniture etc.), roller shutter systems, garage doors and motor control systems are product groups that the company sells with its own brand.




    View product
  • Asaş Coated Aluminium Profile

    Read more

    English EPD Document

      EPD document prepared for Asaş Coated Aluminium Profile with registration number S-P-04796 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Aluminum is silvery white and light weight material. Aluminum is used for a wide range of applications from small cans to aeroplane parts. Most common applications of aluminum are automobile components, food processing industry, building and construction sector. It is used for structural glazing, glass houses, green buildings, structural buildings, partitions, doors and windows. Aluminum is most reliable and commonly used structural material. Aluminum is preferred due to light weight property. It reduces weight, dead loads and costs. Also, aluminum is corrosion resistant. It generates a thin oxide film that prevent corrosion and protect surface. Aluminum is electrical and thermal conductivity leads to good conducting of heat and electricity. Aluminum is non-toxic, odorless, non-magnetic. It also has good reflectivity and not structural changes in low temperature. Besides, aluminum can be 100% recyclable and a recycled product. Coating provides extra thickness over aluminum and gives extra protection from corrosion. The raw aluminum from mills is very dull and coatings enhance the appearance and look. Coating can protect from wear and tear. Also, mill finished aluminum has dye marks and coating can hide the dye marks. Coating can increase reflectivity of materials, electrically insulate the materials and hardness of material. Powder coating is one of the most common used coating types. Electrostatic process is used for anodising. The powder-coated aluminum profile is made by the electrostatic coating basis. Electrostatically charged dry powder is sprayed for coating. The dry powder adsorbs on the aluminum profile, after more than 200°C bake temperature, the powder solidifies into a layer of more than 60 microns thick solid bright coating. The aluminum profiles are good decorated and protected by the paint. Powder coated aluminum profiles have been widely used in building doors, windows, curtain walls and other products for many years because of their small specific gravity, easy processing, and high mechanical strength. Firstly, pre-treatment has done in acid/alkali solutions to remove dirt, grease and impurities. Secondly, powder coating process has done. Dry powder, consists of resin and pigment, is electrostatically charged in a gun and sprayed to the aluminum section. The powder gets attracted to the metal, then sprayed object is heated in an oven. Subsequently, dry powder fuses, melts and form a coating over the surface. Powder coating aluminum profiles can match any building color scheme and have unlimited color choics. Furthermore, powder coating can have done on any surfaces such as steel, aluminum, wood and composite materials. Also, it can be easily dented and repainted as well as the product maintains same color and texture after that.   ASAŞ  Based on its stable financial growth trend since its establishment in 1990, ASAŞ is one of the leading manufacturers in Europe and exports to more than 90 countries across 6 continents. With over 3000 employees, ASAŞ provides services for its clients at its Aluminium Extrusion Profile, Aluminium Composite Panel, Aluminium Flat Rolled Products, PVC Profile and Roller Shutter production facilities which are located in a total of 923.000 m² area, of which 300.000 m² is enclosed, in Turkey. Company offers the advantage of keeping all processes under control both in terms of quality & cost and getting service from a single point with its fully integrated manufacturing facilities which combines all the production functions that customers needed in the supply chain. ASAS GmbH, sub company of ASAŞ, serves as a logistics and service center with 72.793m² closed area in neighboring Koblenz city of Neuwied, Germany.   Passion of "Adding Value" to every job it does, the sector and the society in which it operates and sustainability is at the heart of ASAŞ's business philosophy. Corporate social responsibility projects are carried out with this philosophy to strengthen the society. ASAŞART, which is positioned as an "Art Production Center, operates as a learning+ sharing+ designing+ production platform that brings art and design students together with academics and professionals. Within ASAŞART, special projects are developed to support young talents in their art carrier; aluminium sculpture contest, training programs with universities, international workshops and art exhibitions are organized. Children are at the center of ASAS’ corporate social responsibility projects. Company established ASAS Basketball Club so as to support children to be successful individuals in the future with sports as well as social and educational activities.   ASAŞ positions itself as a solution partner with a passion of trying to foresee the future trends by following the innovations and always offering the best for its customers by investing in technology. Therefore, while making investments company adopts the principles of “continuous investment in sustainability, technology, integration and innovation” to always serve its customers better. With this perspective, company established the first R & D Center in aluminium sector in Turkey. Alloy development, process development and product development studies are carried out under the umbrella of R&D Center. Company develops projects to use its resources more efficiently and grows with environment friendly investments. Besides these, ASAŞ takes part in international projects to contribute the development of new processes that helps to minimize the environmental impact of the production processes and increase the energy efficiency.   ASAŞ produces wide range of value-added products for various sectors like automotive, railway, commercial vehicles, energy, packaging, construction, consumer products, maritime etc. worldwide. Finished and semi-finished products are produced to meet its customers’ needs in their own projects. Besides this, the company enrich its knowledge in the field of production with design & product development studies and offers its high-quality products to the market under its own brands. Aluminium architectural systems (door, window, and curtain wall systems), aluminum composite panels, u-PVC door and window systems, aluminum design products (aluminum flag and lighting poles, aluminum furniture etc.), roller shutter systems, garage doors and motor control systems are product groups that the company sells with its own brand.      
    View product