Address
Mitaş Kompozit Plastik Sanayi ve Tic. A.Ş. ASO 2.OSB Alcı OSB Mh. 2001.Cad. No:16 06930 Sincan / ANKARA, Turkey
GPS
39.809502988832, 32.471827093708
EPD document prepared for MitasComposite Poles with registration number S-P-01917 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.
Filament Winding
Filament winding is a method of controlled winding of the impregnated fibers on the desired pattern, angle and thickness over a rotating mold, which was coated with a release agent. After the product is cured on the mold, it is removed from the mold by a special machine. With this production method, it is possible to obtain very strong and high-quality products as the reinforcement ratio is high. In addition, products with properties such as UV resistance, hardness and fire resistance can be developed with glass fibre additions to the resin.
Pultrusion
Profiles with any cross sections up to 1000 mm width and 200 mm height are possible with pultrusion method in any requested color. Standard profiles for linear pultrusion, which include L, U, Box, Pipe and sheet sections are compatible.
Mitas Composite
Mitaş Composites Plastic Industry and Trade Inc. operates in its modern factory located in ASO 2nd Industrial Zone in Ankara, Turkey. Commissioned in 2018 by Mitaş Energy and incorporated in 2019 to provide services to all its customers by working on innovative composite products with its experienced staff in design, production and assembly, and its environmentally friendly technologies, R&D capability and quality laboratories.
Our production facility uses filament winding method up to 12 m length and 1000 mm dimensions in its highquality and capacity computer-aided machines. Also, all the supporting operations from winding until the end product can be done by the CNC machines within the facility. The facility is capable of using not only glass but also advanced fibers like carbon and aramid together with polyester and epoxy resins. In the facility there is also a pultrusion line which enables to produce any kind of cross sections (I, U, L, O, etc.) up to 1000×300 mm continuously.
The company has ISO 9001 Quality Management System, ISO 14001 Environmental Management System, ISO 45001 Occupational Health & Safety Management System Certifications.