Arslan bey OSB, 1. Cadde No: 6 Kartepe/Kocaeli
EPD document prepared for Kablomar Copolymer Coated Aluminum Tape registration number S-P-04788 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.
Kablomar carries out the production of copolymer coated aluminum tape in three processes. First, the mono-extrusion film production machine is filled with a raw materials mixture of EAA and other chemical supportive additives in certain proportions. The mixture is melted at approximately 150-160 degrees and the copolymer film became suitable for the desired coating color, width, thickness, and quantity. The copolymer film and the bare aluminum foil are loaded into the coating machine in a single/double-side in accordance with the customer’s request. Before the oven, the loaded materials are bound to each other by the pre-lamination process in the coating machine, and they are passed through a five-meter-long tunnel oven at certain speeds with a temperature of approximately 200-300 degrees. The bare aluminum foil and the copolymer film pass through the coating line and becomes completely adhered to each other with the help of temperature (HEAT). In this way, the copolymer-coated aluminum product, which is the main product, becomes ready for slitting. In the third process, the fully automatic double shafts slitting machine is fixed according to the desired ID (inner diameter), width, and length then finally the production of copolymer-coated aluminum tape is completed by slitting the master roll into tapes. Finally, the tapes are packed in accordance with the customer’s specification and became ready for shipment. The aluminum used in the product comes mostly from Asia and Russia.
CableMar was firstly established in 2004 in Sharjah-UAE to serve Cable Industry as the dealer and stockist of different types of raw materials. In 2006 the company completed its organization in Turkey. Since then, CableMar has been constantly evolving and becoming nowadays a solid company in the field of coating/lamination and converting Metallic/Non-Metallic Tapes (e.g., Aluminum, Steel, and Copper) with different types of plastics and chemicals for the Cable Industry. In December 2021, the new modern plant which has been designed and built up with the latest technology has commenced mass production. At the same time, the setup process of our new cold rolling aluminum machine is started. The company is constantly developing from both a technological and an organizational point of view. CableMar works according to a completely integrated and traceable production process, from the raw material to the finished products according to ISO 9001: 2015, ISO 14001: 2015, and ISO 45001: 2018. This quality and efficiency philosophy guarantees Customer satisfaction and respect for the environment.