Özdemir Boru Steel Pipe and Profiles

EPD document prepared for Özdemir Steel Pipe and Profiles registration number S-P-04807 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.

Pipe

Et kalınlığı 2,00mm ve üzerinde EN 10219 ve EN 10217-1 standardlarında üretim yapılmaktadır. Et kalınlığı 2,00mm ve daha ince borular EN10305-3 standardında üretim yapılmaktadır. S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355K2H, S275NH, S275MH, S355NH, S355MH, S420MH, S460NH, S460M.

Profiles

Et kalınlığı 2,00mm ve üzerinde EN 10219 ve eşdeğeri ASTM A500 & TS 5317 & BS 6363 standardlarında üretim yapılmaktadır. Et kalınlığı 2,00mm ve daha ince profiller EN10305-5 standardında üretim yapılmaktadır. S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355K2H, S275NH, S275MH, S355NH, S355MH, S420MH, S460NH, S460MH

ÖZDEMİR BORU

The products investigated in this EPD are the steel pipes and profiles manufactured by Özdemir Boru ve Profil San. Tic. A.Ş at the company’s two plants that are both located in Zonguldak province of Türkiye. The one and only raw material used for the production is primary flat steel.

The amount of steel used to produce 1 ton of final product changes during the production of different thicknesses due to the waste rate. Both pipes and profiles manufacture between the meat thickness range of 0.60 mm to 12.50 mm. When the smallest and largest diameters are considered for both products, the environmental performance for all the main indicators do not change more than 10 %. Additionally, the production methods and energy requirements are all the same for the two plants.

ÖZDEMİR PIPE was established at the beginning of 1980’s and has an important experience in steel pipe and profile production for more than 35 years.

It can produce square and rectangular profiles with outer pipe diameters from 6 mm to 355.6 mm and dimensions from 10×10 to 300×300/200×400. It manufactures hot and cold rolled materials in a wide range of pipe / profile products with a meat thickness of 0.60 mm to a thickness of 12.50 mm. The products have a wide range of sizes and shapes, including round pipe, square and rectangular profile, specially shaped (oval, ellipse, D) profiles, open (U and Omega) profiles.