1 Construction Materials

Showing 1–12 of 86 results

  • Kale Brass Bathroom Mixers (Faucets)

    Read more

    English EPD Document

    EPD document prepared for Kale Grup Brass Bathroom Mixers (Faucets) with registration number S-P-01970 has been registered and published in EPD Turkey and The International EPD System. Besides, Kale Grup Brass Bathroom Mixers (Faucets) EPD document is registered in ECO Platform with registration number 00001339. Registered EPD document applies to all global markets. Kale products consist of bath, shower and sink mixers; concealed bath and shower mixers; taps and valves. Bathroom and sink mixers are separated to single lever and two handled models. Single lever mixers have only one cartridge. Users can adjust the temperature and the flow of hot or cold water using this mechanism. For two handle models, the temperature and the flow of hot and cold water must be regulated by using these separate headworks. The outlet pipes of the sink mixers can rotate 360°. Visible surfaces of products are coated with nickel, chrome or PVD, against corrosion.  Built-in faucets are functionally the same as conventional mixers, but they have a difference in assembly operation due to the structure hidden inside the wall during installation.   Kale Founded in 1957 as Çanakkale Seramik Fabrikaları A.Ş., Kale Group broadened its industrial journey that started with the production of ceramics to include building chemicals, logistics, and defence and aerospace over time. Today, Kale Group has 18 companies, all leaders in their fields, and over 5,000 employees operating in various regions in Turkey. Europe’s fourth and the world’s 15th biggest manufacturer of building materials, Kale Group ranks among the top five building chemicals producers in Europe. Kale Group boasts a large domestic and international market share, offering its products in more than 400 points of sale in 100 countries. Kaleseramik, a company of Kale Group, manufactures ceramic tiles, sanitaryware, taps and related accessories. and placed in the market under the brand names of Çanakkale Seramik, Kalebodur, Kalesinterflex and Kale Banyo. Kaleseramik aiming always for continuous development has received the following certifications within the scope of the system standards; TS EN ISO 9001:2015, ISO 10002:2014, TS EN ISO 14001:2015, ISO 50001:2011, ISO 27001 and OHSAS 18001:2014.
    View product
  • Mitas Composite Poles

    Read more

    English EPD Document

      EPD document prepared for MitasComposite Poles  with registration number S-P-01917 has been registered and published in EPD Turkey and The International EPD System.  Registered EPD document applies to all global markets. Filament Winding Filament winding is a method of controlled winding of the impregnated fibers on the desired pattern, angle and thickness over a rotating mold, which was coated with a release agent. After the product is cured on the mold, it is removed from the mold by a special machine. With this production method, it is possible to obtain very strong and high-quality products as the reinforcement ratio is high. In addition, products with properties such as UV resistance, hardness and fire resistance can be developed with glass fibre additions to the resin. Pultrusion Profiles with any cross sections up to 1000 mm width and 200 mm height are possible with pultrusion method in any requested color. Standard profiles for linear pultrusion, which include L, U, Box, Pipe and sheet sections are compatible. Mitas Composite Mitaş Composites Plastic Industry and Trade Inc. operates in its modern factory located in ASO 2nd Industrial Zone in Ankara, Turkey. Commissioned in 2018 by Mitaş Energy and incorporated in 2019 to provide services to all its customers by working on innovative composite products with its experienced staff in design, production and assembly, and its environmentally friendly technologies, R&D capability and quality laboratories. Our production facility uses filament winding method up to 12 m length and 1000 mm dimensions in its highquality and capacity computer-aided machines. Also, all the supporting operations from winding until the end product can be done by the CNC machines within the facility. The facility is capable of using not only glass but also advanced fibers like carbon and aramid together with polyester and epoxy resins. In the facility there is also a pultrusion line which enables to produce any kind of cross sections (I, U, L, O, etc.) up to 1000x300 mm continuously. The company has ISO 9001 Quality Management System, ISO 14001 Environmental Management System, ISO 45001 Occupational Health & Safety Management System Certifications.  
    View product
  • Serel China (VC) & Fine Fire Clay (FFC) Ceramic Sanitaryware

    Read more

    English EPD Document

      EPD document prepared for Serel China (VC) & Fine Fire Clay (FFC) Ceramic Sanitaryware with registration number S-P-01803 has been registered and published in EPD Turkey and The International EPD System. Besides, Serel China (VC) & Fine Fire Clay (FFC) Ceramic Sanitaryware EPD document is registered in ECO Platform with registration number 00001344. Registered EPD document applies to all global markets.     Ceramic sanitary ware products are such products as washbasins, cisterns, bidets, squatting pans, urinals, and shower trays, which are composed of inorganic and non-metallic materials such as clay, kaolin, quartz and feldspar in definite ratios. /UNI 4543-1/ and /4543- 2/ standards also define the materials used to make sanitary ware items as the mix of the aforementioned raw materials. The mix is ground until it takes on the consistency of a ceramic mass that is suitable for forming the body of the item. The body is glazed before it undergoes a single fire in a tunnel or an intermittent kiln, where it reaches the temperatures ranging from 1180°C to 1220°C for a fixed time. After the firing process, the ceramic mass becomes compact and white with a water absorption rate that is less than 12%.   Serel   Performing production of ceramic sanitary ware with SEREL brand for 30 years, our company is affiliated to the ELGINKAN Holding. Not compromising on quality, SEREL is among the leading companies in the world that offers years of experience with savings, health, aesthetics and comfort featured products in world markets with professional management mentality. Having a rigorous, innovative and leading approach in its product development activities, SEREL protects all details of user needs in its product development works and gives to life unique designs. With its wide product range, SEREL ranks among the brands to be supported by Turquality, which is the single state  supported branding program of the world. Creating human and environmental friendly products by ensuring water and energy saving while preventing overuse of the precious and limited resources in the world is one of the principles of SEREL. SEREL continues its activities by applying TS EN ISO 9001 Quality Management System, TS EN ISO 14001 Environmental Management System, ISO 45001 Occupational Health and Safety  management System, 50001 Energy Management System and TS ISO 10002 Customer Satisfaction norms. SEREL has become the first company to qualify for the TSE COVID-19 Safe Production  certificate in the Aegean Region and Ceramic Industry. SEREL is adding new technologies every day to those that provide added value to ceramic sanitary ware in its product range. R&D works such as water saving water closets, Extraclean surface technology that prevents showing of dirt on surfaces, glaze technology preventing formation of bacteria on surface, anti-bacterial featured ‘SEREL’ toilet covers and ‘Hands Free Cleansing System’ integrated on the water closet are among works of SEREL that aims to offer the final user the best all the time.
    View product
  • AGT MDF (Raw)

    Read more

     

    English EPD Document

      EPD document prepared for AGT MDF (Raw) with registration number S-P-01912 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   Medium-density fibreboard (MDF) is a wood product valued for its fabricability which allows precision joinery work and finishing. Medium Density Fibreboard is widely used to manufacture furniture. Medium Density Fibreboard can also be used as a building material. Medium Density Fibreboard panels are composed of wood, resin and wax.   AGT   AGT (Advanced Technology in Wood Industry), starting out with the dream of processing and developing wood products customized for individual and corporate requirements in 1984 in Antalya, is operating today as one of the leading companies of the world in furniture components sector. AGT serves for the construction industry with its production of flooring and skirting and for the furniture and decoration sector with its production of MDF, MF-MDF, Panel, and Profile in its modern production facilities established on an area of 400 thousand square meters at the Antalya Organized Industrial Zone. Since its  stablishment, AGT has never compromised on their ethical value and quality principles. Quality, trend and development are still among heir main objectives for all their customers, employees and  usiness partners. Today, AGT adds color, elegancy and sustainable viability to living space of millions of  eople who give importance to quality and aesthetics through there more than 1000 sales points in 5 continents. As well as the dealer channels spread all over Turkey, AGT has sales points over 5  ontinents and exports to more than 70 countries. The company has ISO 9001 Quality Management System, ISO 14001 Environment Management System, ISO 45001 Occupational Health & Safety Management System Certification, EFQM (European Foundation for Quality Management), PEFC (Programme for the Endorsement of Forest Certification), FSC(Forest Stewardship Council) and TSCA Certification.  
    View product
  • AGT Flooring

    Read more

     

    English EPD Document

      EPD document prepared for AGT Flooring with registration number S-P-01915 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   AGT flooring is a multi-layer flooring product fused together with a lamination process.   AGT   AGT (Advanced Technology in Wood Industry), starting out with the dream of processing and developing wood products customized for individual and corporate requirements in 1984 in Antalya, is operating today as one of the leading companies of the world in furniture components sector. AGT serves for the construction industry with its production of flooring and skirting and for the furniture and decoration sector with its production of MDF, MF-MDF, Panel, and Profile in its modern production facilities established on an area of 400 thousand square meters at the Antalya Organized Industrial Zone. Since its  stablishment, AGT has never compromised on their ethical value and quality principles. Quality, trend and development are still among heir main objectives for all their customers, employees and  usiness partners. Today, AGT adds color, elegancy and sustainable viability to living space of millions of  eople who give importance to quality and aesthetics through there more than 1000 sales points in 5 continents. As well as the dealer channels spread all over Turkey, AGT has sales points over 5  ontinents and exports to more than 70 countries. The company has ISO 9001 Quality Management System, ISO 14001 Environment Management System, ISO 45001 Occupational Health & Safety Management System Certification, EFQM (European Foundation for Quality Management), PEFC (Programme for the Endorsement of Forest Certification), FSC(Forest Stewardship Council) and TSCA Certification.      
    View product
  • AGT MDF Panels and Profiles

    Read more

     

    English EPD Document

      EPD document prepared for AGT Panels and Profiles with registration number S-P-01914 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   AGT Panels and Profiles is manufactured by using world class MDF of AGT and it presents colourful solutions special for every venue. PVC foil coating which has superior surface quality is what brings in rich color choices to it… Moreover AGT Panel could be manufactured in demanded size and colors as well as standard colors.   AGT   AGT (Advanced Technology in Wood Industry), starting out with the dream of processing and developing wood products customized for individual and corporate requirements in 1984 in Antalya, is operating today as one of the leading companies of the world in furniture components sector. AGT serves for the construction industry with its production of flooring and skirting and for the furniture and decoration sector with its production of MDF, MF-MDF, Panel, and Profile in its modern production facilities established on an area of 400 thousand square meters at the Antalya Organized Industrial Zone. Since its  stablishment, AGT has never compromised on their ethical value and quality principles. Quality, trend and development are still among heir main objectives for all their customers, employees and  usiness partners. Today, AGT adds color, elegancy and sustainable viability to living space of millions of  eople who give importance to quality and aesthetics through there more than 1000 sales points in 5 continents. As well as the dealer channels spread all over Turkey, AGT has sales points over 5  ontinents and exports to more than 70 countries. The company has ISO 9001 Quality Management System, ISO 14001 Environment Management System, ISO 45001 Occupational Health & Safety Management System Certification, EFQM (European Foundation for Quality Management), PEFC (Programme for the Endorsement of Forest Certification), FSC(Forest Stewardship Council) and TSCA Certification.        
    View product
  • AGT Melamine Faced MDF

    Read more

     

    English EPD Document

      EPD document prepared for AGT Melamine Faced MDF with registration number S-P-01913 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   Melamine Faced MDF is obtained by coating the decorative design on the MDF board, which is made by firing melamine resin and glue with technological impregnation machines   AGT   AGT (Advanced Technology in Wood Industry), starting out with the dream of processing and developing wood products customized for individual and corporate requirements in 1984 in Antalya, is operating today as one of the leading companies of the world in furniture components sector. AGT serves for the construction industry with its production of flooring and skirting and for the furniture and decoration sector with its production of MDF, MF-MDF, Panel, and Profile in its modern production facilities established on an area of 400 thousand square meters at the Antalya Organized Industrial Zone. Since its  stablishment, AGT has never compromised on their ethical value and quality principles. Quality, trend and development are still among heir main objectives for all their customers, employees and  usiness partners. Today, AGT adds color, elegancy and sustainable viability to living space of millions of  eople who give importance to quality and aesthetics through there more than 1000 sales points in 5 continents. As well as the dealer channels spread all over Turkey, AGT has sales points over 5  ontinents and exports to more than 70 countries. The company has ISO 9001 Quality Management System, ISO 14001 Environment Management System, ISO 45001 Occupational Health & Safety Management System Certification, EFQM (European Foundation for Quality Management), PEFC (Programme for the Endorsement of Forest Certification), FSC(Forest Stewardship Council) and TSCA Certification.  
    View product
  • Midal Cable AACSR Sveid

    Read more

     

    English EPD Document

      EPD document prepared for Midal Cable AACRS Sveid with registration number S-P-01903 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   Aluminium Conductor Steel Reinforced (ACSR) is concentrically stranded conductor with one or more layers of hard drawn 1350-H19 aluminium wire on galvanized steel wire core. The core can be single wire or stranded depending on the size. Steel core wire is available in Class A , B or Class C  alvanization for corrosion protection. Additional corrosion protection is available through the application of grease to the core or infusion of the completed conductor with grease. The proportion of steel and aluminium in an ACSR conductor can be selected based on the mechanical strength and current carrying capacity demanded by each application. ACSR conductors are recognized for their record of cost. dependability and favourable strength / weight ratio. ACSR conductors combine the light weight and good conductivity of aluminium with the high tensile strength and ruggedness of steel. In line design. This can provide higher tensions, less sag, and longer span lengths than obtainable with most other types of overhead conductors. Midal manufacture and supply ACSR on non-returnable wooden/steel reels or returnable steel reels depending on customer requirement.   Midal Cable   Midal Kablo Sanayi ve Ticaret A.Ş. is established in 2011 in Turkey and started production by the 2nd Q of 2012 with investment from Midal Cables Group, by far the highest Aluminium Wire Rod and Aluminium Overhead line production capacity in the world. Midal Cables Group draws the attention with their single-product groups despite the fact that the Company has the highest aluminium processing capacity in the world for the production of energy products. Midal Kablo Sanayi ve Ticaret A.Ş. is the only production facility in Turkey on Aluminium Overhead Line production. Its production focus is on Aluminium Overhead lines and able to produce all kinds of Aluminium and Aluminium Derivatives Overhead Line conductor in all dimensions compliant to all standards. Midal Kablo Sanayi ve Ticaret A.Ş. has been exported to many countries around the world. With its sales performance in 2012 and 2013, it received “Technical Competence” accolade for exporting whole its production. The company started to serve the domestic market due to demand created by increasing energy investment after 2013. As a result, its share of the domestic market increased while continuing the export performance. As the company always ranked among top 1000 firms in export in Turkey compiled by Turkish Exporters Assembly (TIM) each year since its establishment in 2012. It also always ranked among the fi rst 25 exporter fi rms all the times in Iron and Non-Iron Metals Group Also including year 2017. It has been top exporter since and has always made the highest amount of export in its industry in the same period. Midal Kablo Sanayi ve Ticaret A.Ş. makes production at STM. CAN/CSA. DIN. NFC. IEC and BS EN standards and produces all the products involved in the relevant standards. The foreign market share of the Company is considerably high since it is “first choice” supplier in many countries primarily UK, Finland, Norway, Germany, Netherlands, Canada and Brazil. It is also leading the market share in Turkish domestic market.  
    View product
  • Midal Cable ACSR Parrot

    Read more

     

    English EPD Document

      EPD document prepared for Midal Cable ACRS Parrot with registration number S-P-01805 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   Aluminium Conductor Steel Reinforced (ACSR) is concentrically stranded conductor with one or more layers of hard drawn 1350-H19 aluminium wire on galvanized steel wire core. The core can be single wire or stranded depending on the size. Steel core wire is available in Class A , B or Class C  alvanization for corrosion protection. Additional corrosion protection is available through the application of grease to the core or infusion of the completed conductor with grease. The proportion of steel and aluminium in an ACSR conductor can be selected based on the mechanical strength and current carrying capacity demanded by each application. ACSR conductors are recognized for their record of cost. dependability and favourable strength / weight ratio. ACSR conductors combine the light weight and good conductivity of aluminium with the high tensile strength and ruggedness of steel. In line design. This can provide higher tensions, less sag, and longer span lengths than obtainable with most other types of overhead conductors. Midal manufacture and supply ACSR on non-returnable wooden/steel reels or returnable steel reels depending on customer requirement.   Midal Cable   Midal Kablo Sanayi ve Ticaret A.Ş. is established in 2011 in Turkey and started production by the 2nd Q of 2012 with investment from Midal Cables Group, by far the highest Aluminium Wire Rod and Aluminium Overhead line production capacity in the world. Midal Cables Group draws the attention with their single-product groups despite the fact that the Company has the highest aluminium processing capacity in the world for the production of energy products. Midal Kablo Sanayi ve Ticaret A.Ş. is the only production facility in Turkey on Aluminium Overhead Line production. Its production focus is on Aluminium Overhead lines and able to produce all kinds of Aluminium and Aluminium Derivatives Overhead Line conductor in all dimensions compliant to all standards. Midal Kablo Sanayi ve Ticaret A.Ş. has been exported to many countries around the world. With its sales performance in 2012 and 2013, it received “Technical Competence” accolade for exporting whole its production. The company started to serve the domestic market due to demand created by increasing energy investment after 2013. As a result, its share of the domestic market increased while continuing the export performance. As the company always ranked among top 1000 firms in export in Turkey compiled by Turkish Exporters Assembly (TIM) each year since its establishment in 2012. It also always ranked among the fi rst 25 exporter fi rms all the times in Iron and Non-Iron Metals Group Also including year 2017. It has been top exporter since and has always made the highest amount of export in its industry in the same period. Midal Kablo Sanayi ve Ticaret A.Ş. makes production at STM. CAN/CSA. DIN. NFC. IEC and BS EN standards and produces all the products involved in the relevant standards. The foreign market share of the Company is considerably high since it is “first choice” supplier in many countries primarily UK, Finland, Norway, Germany, Netherlands, Canada and Brazil. It is also leading the market share in Turkish domestic market.  
    View product
  • Midal Cable ACSR Grackle

    Read more

     

    English EPD Document

      EPD document prepared for Midal Cable ACRS Grackle with registration number S-P-01806 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   Aluminium Conductor Steel Reinforced (ACSR) is concentrically stranded conductor with one or more layers of hard drawn 1350-H19 aluminium wire on galvanized steel wire core. The core can be single wire or stranded depending on the size. Steel core wire is available in Class A , B or Class C  alvanization for corrosion protection. Additional corrosion protection is available through the application of grease to the core or infusion of the completed conductor with grease. The proportion of steel and aluminium in an ACSR conductor can be selected based on the mechanical strength and current carrying capacity demanded by each application. ACSR conductors are recognized for their record of cost. dependability and favourable strength / weight ratio. ACSR conductors combine the light weight and good conductivity of aluminium with the high tensile strength and ruggedness of steel. In line design. This can provide higher tensions, less sag, and longer span lengths than obtainable with most other types of overhead conductors. Midal manufacture and supply ACSR on non-returnable wooden/steel reels or returnable steel reels depending on customer requirement.   Midal Cable   Midal Kablo Sanayi ve Ticaret A.Ş. is established in 2011 in Turkey and started production by the 2nd Q of 2012 with investment from Midal Cables Group, by far the highest Aluminium Wire Rod and Aluminium Overhead line production capacity in the world. Midal Cables Group draws the attention with their single-product groups despite the fact that the Company has the highest aluminium processing capacity in the world for the production of energy products. Midal Kablo Sanayi ve Ticaret A.Ş. is the only production facility in Turkey on Aluminium Overhead Line production. Its production focus is on Aluminium Overhead lines and able to produce all kinds of Aluminium and Aluminium Derivatives Overhead Line conductor in all dimensions compliant to all standards. Midal Kablo Sanayi ve Ticaret A.Ş. has been exported to many countries around the world. With its sales performance in 2012 and 2013, it received “Technical Competence” accolade for exporting whole its production. The company started to serve the domestic market due to demand created by increasing energy investment after 2013. As a result, its share of the domestic market increased while continuing the export performance. As the company always ranked among top 1000 firms in export in Turkey compiled by Turkish Exporters Assembly (TIM) each year since its establishment in 2012. It also always ranked among the fi rst 25 exporter fi rms all the times in Iron and Non-Iron Metals Group Also including year 2017. It has been top exporter since and has always made the highest amount of export in its industry in the same period. Midal Kablo Sanayi ve Ticaret A.Ş. makes production at STM. CAN/CSA. DIN. NFC. IEC and BS EN standards and produces all the products involved in the relevant standards. The foreign market share of the Company is considerably high since it is “first choice” supplier in many countries primarily UK, Finland, Norway, Germany, Netherlands, Canada and Brazil. It is also leading the market share in Turkish domestic market.  
    View product
  • Gaziantep Ytong Autoclaved Aerated Concrete (AAC)

    Read more

    Turkish EPD Document

     

    English EPD Document

      EPD document prepared for Gaziantep Ytong Autoclaved Aerated Concrete (AAC) with registration number S-P-01804 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   The products mentioned are unreinforced building blocks in various formats made of autoclaved aerated concrete /TS EN 771-4: 2011/. AAC belongs to the porous steam-cured light-weight concrete group. The ground quartzite is mixed with gypsum, cement, quicklime and recycled AAC materials (slurry and powder) that has been reduced to small pieces, adding water and aluminum powder, in a mixer, until it becomes a watery suspension. It is then poured into a casting mould. The aluminum reacts in an alkaline milieu. Thus, gaseous hydrogen is formed which creates pores in the mass and escapes without leaving any residue. The pores usually have a diameter 0.5- 1.5 mm and are filled exclusively with air. After setting once, semisolid raw blocks are created, from which the autoclaved aerated concrete building components are then cut with high precision. The formation of the final qualities of the building component occurs during the subsequent steam-curing over 5 to 12 hours at approximately 190˚ C with approximately 12 bar pressure in steam pressure kettles or autoclaves, as they are called. The used substances create calcium hydro silicates, which correspond to the naturally occurring mineral tobermorite. The reaction of the material is complete when removed from the autoclave. Therefore, the reaction does not take as long as the hardening of concrete. Once the steaming process is complete, the steam is used for other autoclave cycles. AAC blocks are then piled onto wooden pallets and shrink-wrapped in polyethylene wrap.   Gaziantep Ytong   The company, Gaziantep Ytong, the first foreign capital joint venture of SANKO group, was established in 1997 on partnership of Turk Ytong, Ytong International and SANKO group companies.   The company started the production in 1998 in Gaziantep, on 80.000 m2 area, 10.000 m2 of this covered. The production is made with the most advanced and unique  technology  in Gaziantep Ytong , one of the five plants of Ytong in Turkey.   In Gaziantep Ytong, autoclaved aerated concrete and reinforced aerated building material production made according to TS EN 771-4 and TS 453 standards, there are production of  G2/04 ve G4/06 building blocks, reinforced materials, ytong bonding adhesives, Alsecco plaster and Masterkim construction chemicals. Gaziantep Ytong, producing materials having the properties of modern construction Technologies, has the capacity of 450.000 m3 per year as a block material. The company has TS EN ISO 9001 Quality, TS 18001 Safety and TS 14001 Enviroment  management certificates and CE marking, fullfills the 13% of Turkey autoclaved aerated concrete production capacity.   The name of ytong is identified with the modern buildings, constructed by autoclaved aerated concrete blocks and known with constant and relaible image all over the World. Ytong brand   has the highest production capacity of autoclaved aerated gas concrete in the world totally in 21 countries and 77 plants, took part of best known brands of this century in October 2009 , in Germany.  
    View product
  • Polisan Perla Semi Matte Interior Paint

    Read more

    English EPD Document

      EPD document prepared for Polisan Perla Semi Matte Interior Paint with registration number S-P-01802 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets.   Water and acrylic copolymer based, silky matte, decorative final coat interior paint with silicone additive along with high coverage and wipe-clean features. Perla Semi-matte is a long lasting and odorless paint with high coverage and wipe-clean feature. Furthermore it is easy to adjust consistency with water, integrates with application surface is highly breathable and easy to apply. Its silicon and special resin content makes it more water-repellent and vapor permeable and prevents the paint from bubbling and peeling especially in humid environments, while enhancing the wipe-clean durability of the paint.   Polisan   The Polisan brand is widely known in glue and paint sectors. The name is derived from polyvinyl acetate (PVA) glue and the word “sanayi” (Turkish for industry).   The founders of the company, the Bitlis family, started commercial operations in the 1920s as a merchandising firm until the establishment of a fabric painting and knitting business called Sark Mensucat. In 1964, they entered the chemicals industry with the foundation of Polisan Chemical, which produced emulsifier resins. In 1985, paint production had begun under the Polisan brand.   Polisan Kansai Boya’s most recent paint production and warehouse facility investment, which started in 2016 on 142,000 square meter land in the Gebze Chemicals Specialized Organized Industrial Zone, was completed in June 2018. Having started with a paint production capacity of 10,000 tons/year in 1985, Polisan Kansai Boya now has a capacity of 180,000 tons/year in 3 shifts at the former paint facility, which has now been relocated. Built to International Standards, the fully automated new facility has tripled the annual production capacity, rising it to 180,000 tons/year in a single shift. With the flexibility of working 3 shifts a day, without requiring additional investment spending, the annual production capacity of the new facility can rise to as high as 540,000 tons, which almost matches the size of Turkey’s total decorative market. The new facility was designed in order to receive a “Green Building Certificate” in an attempt to lead the transformation of the market in terms of sustainability and has become the 23rd production facility within Turkey to receive a LEED certification. This fully-automated facility is positioned as a regional production hub by Polisan’s Japanese partner Kansai Paint. Thereby, Polisan Kansai Boya is one step closer to its goal of becoming a global brand.   Polisan has ISO 9001, ISO 10001, ISO 14001, ISO 18001, ISO 50001 and ISO 27001 standards certifications. With the renewal of their EPDs, Polisan once again shows its commitment to the environment.  
    View product