Türkçe
Showing all 10 results
-
Dalsan DERZTEK-Jointing Compound
Read moreView product
EPD document prepared for Dalsan DERZTEK-Jointing Compound with registration number S-P-04049 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. DERZTEK is a jointing compound which is used at COREX plasterboard joints over joint tapes. DERZTEK is easy to apply. Special additives in its structure retard the absorption of its moisture by the plasterboard surface. As well as functioning as a filler, DERZTEK also forms a smooth surface as a result of its special grain- size distribution. DERZTEK is highly adhesive. As it is a breathable material, by balancing the humidity DERZTEK creates a healthier environment. Because DERZTEK is so flexible, the plasterboard will not crack at the joints and will flex as one single surface. DERZTEK is GREENGUARD certificated product that shows the effects of our products on indoor air quality. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.
English EPD Document -
Dalsan ADERTEK- Gypsum Based Adhesive
Read moreView product
EPD document prepared for Dalsan ADERTEK- Gypsum Based Adhesive with Perlite with registration number S-P-04048 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. ADERTEK is a construction plaster that is used for bonding COREX, expanded polystyrene (EPS), extruded polystyrene (XPS), mineral wools (glasswool, rockwool) and composite insulation panels to surfaces such as brick, concrete, aerated concrete etc. It is the most convenient product for direct bonding applications where volume loss could be minimized by keeping wall as thin as possible. Because it is a breathable material, ADERTEK leads to a healthier environment by stabilizing humidity. It has highly adhesive properties Its strength increases quickly after setting. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document -
Dalsan KARTEK- Cornice Plaster
Read moreView product
EPD document prepared for Dalsan KARTEK- Cornice Plaster with Perlite with registration number S-P-04047 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. KARTEK, is a plaster used for the production of decorative elements like cornices. Its working time enables easy application with low wastage. KARTEK is easy-to-mix. Because it is a breathable material, KARTEK helps create a healthier environment by stabilizing the humidity. KARTEK has high resistance and surface hardness. Because of its fine grain- size, KARTEK produces a smooth cast surface. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document -
Dalsan SONTEK-Thin Coat Plaster
Read moreView product
EPD document prepared for Dalsan SONTEK-Thin Coat Plaster with Perlite with registration number S-P-04046 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. SONTEK is a gypsum- based thin plaster which is used as a top coat plaster with its high adhesion strength. SONTEK applied on surfaces which are gypsum plaster, cement plaster and plasterboard. Special additives in its formulation delay the absorption of SONTEK mortar’s water by the substrate. SONTEK can be applied easily. Corrects cracks and defects on the surfaces. Prepares smooth surfaces for SATENTEK finishing plaster. SONTEK creates a smooth surface and reduces the finishing plaster usage. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document -
Dalsan SATENTEK- Finishing Plaster
Read moreView product
EPD document prepared for Dalsan SATENTEK- Finishing Plaster with Perlite with registration number S-P-04045 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. SATENTEK, with its high adherence, is a finishing plaster used as an undercoat for all types of painting. SATENTEK, can be applied to SIVATEK and COREX plasterboard surfaces. Its long workability time enables an easy application with a low waste rate. Special additives in its formulation delay the absorption of SATENTEK mortar’s water by the substrate. As it is a breathable material, by regulating humidity SATENTEK leads to a healthier environment. SATENTEK’s paste-like texture makes it easy to apply. As it is a breathable material, by regulating humidity SATENTEK leads to a healthier environment. SATENTEK is GREENGUARD certificated product that shows the effects of our products on indoor air quality. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document -
Dalsan SIVATEK- Manual Plaster with Perlite
Read moreView product
EPD document prepared for Dalsan SIVATEK- Manual Plaster with Perlite with registration number S-P-04044 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. SIVATEK is a gypsum- based, specially formulated ready-to-use bagged plaster that can be applied directly to brick, concrete, aerated concrete, etc. Its long workability time enables an easy application with a low waste rate. SIVATEK does not slump while setting on the surfaces to which it is applied. It has high strength, surface hardness and adherence. Because it is a breathable material, by regulating humidity SIVATEK leads to a healthier environment. It is a non-combustible material. The water in its structure helps retard fire. It does not cause mould, bacterial or fungal growth. SIVATEK is GREENGUARD certificated product that shows the effects of our products on indoor air quality. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document -
Dalsan Maxitek Gypsum Based Plaster
Read moreView product
EPD document prepared for Dalsan Maxitek Gypsum Based Plaster with registration number S-P-04043 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. MAXITEK, silobas ile sevk edilen alçı bazlı hazır makine sıvasıdır. Tuğla, beton, brüt beton, gazbeton, bimsblok vb. malzemeler üzerine doğrudan uygulanır. Yüksek yüzey sertliğine sahiptir. Nefes alan bir malzeme olduğundan nem oranını dengeleyerek sağlıklı bir ortam oluşturur. MAXITEK, iş gücünü artırır, uygulamacıyı yükten, şantiyeyi ise torba atığından kurtarır. MAXITEK, özel formülü sayesinde silodan pnömatik sistem ile taşınabilme özelliğine sahiptir. Yanmaz bir malzemedir. Bünyesindeki kristal sudan dolayı yangın geciktirici özelliğe sahiptir. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document -
Dalsan ALÇITEK – Projection Gypsum Plaster
Read moreView product
EPD document prepared for Dalsan ALÇITEK - Projection Gypsum Plaster with registration number S-P-04042 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. ALÇITEK is gypsum-based, ready-to-use spray plaster. ALÇITEK can be directly applied on brick, concrete, aerated-concerete, etc. In one layer, the surface is ready to paint. It is a non-combustible material. The water in its structure helps retard fire. It has high surface hardness and a brilliant appearance. Because it is a breathable material, ALÇITEK leads to a healthier environment by stabilizing humidity in the air. ALÇITEK is GREENGUARD certificated product that shows the effects of our products on indoor air quality. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document -
Dalsan ALÇITEK TORO – Projection Gypsum Plaster
Read moreView product
EPD document prepared for Dalsan ALÇITEK TORO - Projection Gypsum Plaster with registration number S-P-04041 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. ALÇITEK TORO is gypsum-based, ready-to-use spray plaster. ALÇITEK TORO can be directly applied on brick, concrete, aerated-concerete, etc. It is a non-combustible material. The water in its structure helps retard fire. It has high surface hardness and a brilliant appearance. Because it is a breathable material, ALÇITEK TORO leads to a healthier environment by stabilizing humidity in the air.ALÇITEK TORO is GREENGUARD certificated product that shows the effects of our products on indoor air quality. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document -
Dalsan ALÇITEK GOLD – Projection Gypsum Plaster
Read moreView product
EPD document prepared for Dalsan ALÇITEK GOLD - Projection Gypsum Plaster with registration number S-P-04040 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Bagged and ready to use machine-applicable gypsum based plaster. Directly applied onto materials such as brick, fair faced concrete, gas concrete, pumice concrete, etc. Less plaster is used for the same coverage thanks to its special formula. The surface is ready for painting after only one coat. Does not require satin plaster skim. Can be manually applied with no difficulty onto intricate architectural details of door and window tympana. Attains high surface hardness and a brilliant surface. Since it is a breathable material, by balancing moisture Alcitek Gold leads to a healthier environment. It is non-combustible. The water in its structure helps retard fire. ALÇITEK GOLD is GREENGUARD certificated product that shows the effects of our products on indoor air quality. DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.English EPD Document