1 Construction Materials

Showing 25–36 of 181 results

  • Dalsan Red COREX 12,5 mm Plasterboard

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan Red COREX 12,5 mm Plasterboard with registration number S-P-04062 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Red COREX is a plasterboard that is used for construction of partition walls, drywall linings and suspended ceilings where resistance to fire is required. To increase fire resistance, the core of Red COREX is enhanced by special fibres and additives. Both faces of Red COREX are covered with special paper that gives flexibility and high strength to the plasterboard. Red COREX can be used in public buildings such as schools, hospitals, hotels, and commercial and business centres to improve fire safety. Red COREX is GREENGUARD certificated product that shows the effects of our products on indoor air quality.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan Green COREX 12,5 mm Plasterboard

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan Green COREX 12,5 mm Plasterboard with registration number S-P-04061 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Green COREX, is a plasterboard that is used in the construction of partition walls, drywall linings and suspended ceilings where water and moisture resistance are required. For water and moisture resistance, the core of Green COREX is strengthened with water repellent agents. Both faces of Green COREX are covered with special paper that gives flexibility and high strength to the plasterboard. Green COREX is plasterboard that can be subjected to water and moisture for extended periods and is suitable for bathrooms, toilets, kitchens, dining areas and loft spaces. Green COREX can be covered with tile, ceramic tile and similar materials. Green COREX is GREENGUARD certificated product that shows the effects of our products on indoor air quality.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan Falcon COREX Green 12,5 mm Plasterboard

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan Falcon COREX Green 12,5 mm Plasterboard with registration number S-P-04060 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Falcon COREX Green is 17% lighter than standard COREX Green. With Falcon COREX Green, the weight of the suspended ceiling can be reduced by 17% and in the double layer partition wall by up to 5.4 kg per square meter. The Falcon COREX Green, which weighs 6.66 kg/m2 is manufactured with advanced COREX technology. For water and moisture resistance, the core of Falcon COREX Green is strengthened with water repellent agents. Falcon COREX Green, is a plasterboard that is used in the construction of partition walls, drywall linings and suspended ceilings where water and moisture resistance are required. Both faces of Falcon COREX Green are covered with special paper that gives flexibility and high strength to the plasterboard. Falcon COREX Green can be covered with tile, ceramic tile and similar materials. Falcon COREX Green is plasterboard that can be subjected to water and moisture for extended periods and is suitable for bathrooms, toilets, kitchens, dining areas and loft spaces.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan Falcon COREX White 12,5 mm Plasterboard

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan Falcon COREX White 12,5 mm Plasterboard with registration number S-P-04059 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Falcon COREX is 17% lighter than standard COREX. With Falcon COREX, the weight of the suspended ceiling can be reduced by 17% and in the double layer partition wall by up to 5.4 kg per square meter. The Falcon COREX, which weighs 6.66 kg/m2 is manufactured with advanced COREX technology. The core of Falcon COREX is made from specially calcined high-purity natural gypsum that gives lightness, hardness, high strength and workability to plasterboard. Falcon COREX is a Low Carbon Emmission board. Falcon COREX is ideal for suspended ceiling applications. Suspended ceilings made with Falcon COREX bend less than those made with equivalent boards.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan White COREX 12,5 mm Plasterboard

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan White COREX 12,5 mm Plasterboard with registration number S-P-04058 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. White COREX is a plasterboard that is used in the construction of partition walls, dry- linings and suspended ceilings. The core of white COREX is made from specially calcined high-purity natural gypsum that gives lightness, hardness, high strength and workability to plasterboard. Both faces of white COREX are covered with special paper that gives flexibility and high strength to the plasterboard. Installation of white COREX is quick and easy, so it saves labour and time, and greatly reduces construction costs. Walls and suspended ceilings made of white COREX are light and flexible. White COREX is GREENGUARD certificated product that shows the effects of our products on indoor air quality.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan COREX 90 -12,5 mm Plasterboard

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan COREX 90 -12,5 mm Plasterboard with registration number S-P-04057 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. COREX 90 is a plasterboard used in constructing of plasteboard partition walls, curtain walls and suspended ceilings. COREX 90 has different dimensions than the regular plasterboards. The width is 90 cm and the length is 180 cm. COREX 90 is easy to apply. Thus it saves labor and time. It can be applied both horizontally and vertically. It provides easy cutting and application. COREX 90 can be easily carried horizontally and vertically especially in narrow spaces, and minimizes the amount of damage during handling. COREX 90 is 12 kg per board, and it can be easily handled & apply by one person.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan RIGHTFINISH JOINTING PLASTER

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan RIGHTFINISH JOINTING PLASTER with registration number S-P-04056 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. JOINTING PLASTER is a air-drying, gypsum based jointing material used for filling and finishing of COREX plasterboard joints. JOINTING PLASTER is highly adhesive and easy to apply. Its long workability time enables an easy application with a low waste rate. It is easy to prepare JOINTING PLASTER mortar. JOINTING PLASTER creates a smooth surface. Easy to use for repairs and maintenance. JOINTING PLASTER provides white surfaces finish.With GREENGUARD Gold Certification and qualifies as a low VOC emitting material.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan RIGHTFINISH ADHESIVE PLASTER

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan RIGHTFINISH SKIMCOAT- Thin Coat Plaster with registration number S-P-04053 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. SKIMCOAT is a gypsum-based thin plaster which can be applied on wide range of surfaces. SKIMCOAT is a multipurpose plaster for gypsum and cement based undercoat plasters, masonry and plasterboard surfaces. Its long workability time enables an easy application with a low waste rate. SKIMCOAT can be applied easily. Corrects cracks and defects on the surfaces. It is easy to prepare SKIMCOAT mortar compare to conventional plasters. SKIMCOAT creates a smooth surface. Easy to use for repairs and maintenance. SKIMCOAT provides white surfaces. With GREENGUARD Gold Certification and qualifies as a low VOC emitting material.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan RIGHTFINISH WALLCOAT – Hardwall Plaster

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan RIGHTFINISH WALLCOAT - Hardwall Plaster with registration number S-P-04054 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. WALLCOAT is a gypsum based plaster which can be directly applied to brickwork, blockwork, aerated concrete or concrete surfaces. WALLCOAT provides more coverage with less material. WALLCOAT provides a high impact resistance and high quality surface to walls and ceilings. Its long workability time enables an easy application with a low waste rate. WALLCOAT can be applied easily. It is easy to prepare WALLCOAT mortar. It is suitable for application by hand or by plaster projection machine. WALLCOAT creates a smooth surface. Easy to use for repairs and maintenance. WALLCOAT provides white surfaces.With GREENGUARD Gold Certification and qualifies as a low VOC emitting material.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan RIGHTFINISH SKIMCOAT- Thin Coat Plaster

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan RIGHTFINISH SKIMCOAT- Thin Coat Plaster with registration number S-P-04053 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. SKIMCOAT is a gypsum-based thin plaster which can be applied on wide range of surfaces. SKIMCOAT is a multipurpose plaster for gypsum and cement based undercoat plasters, masonry and plasterboard surfaces. Its long workability time enables an easy application with a low waste rate. SKIMCOAT can be applied easily. Corrects cracks and defects on the surfaces. It is easy to prepare SKIMCOAT mortar compare to conventional plasters. SKIMCOAT creates a smooth surface. Easy to use for repairs and maintenance. SKIMCOAT provides white surfaces. With GREENGUARD Gold Certification and qualifies as a low VOC emitting material.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan RIGHTFINISH BASECOAT- Undercoat Plaster

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan RIGHTFINISH BASECOAT- Undercoat Plaster with registration number S-P-04052 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. BASECOAT is a gypsum based plaster which can be directly applied to brickwork, blockwork, aerated concrete or concrete surfaces. BASECOAT provides a high impact resistance and high quality surface to walls and ceilings. Its long workability time enables an easy application with a low waste rate. BASECOAT can be applied easily. It is easy to prepare BASECOAT mortar. It is suitable for application by hand or by plaster projection machine. BASECOAT creates a smooth surface. Easy to use for repairs and maintenance. BASECOAT provides white surfaces. With GREENGUARD Gold Certification and qualifies as a low VOC emitting material.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product
  • Dalsan FLOORTEK-Self Levelling Screed

    Read more

     

    English EPD Document

      EPD document prepared for Dalsan FLOORTEK-Self Levelling Screed with registration number S-P-04051 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. FLOORTEK is a ready to use, self leveling floor screed. Ready to be walked on 2 hours after the application is completed. Wait until fully dries according to climate conditions for further applications. Does not crack thanks to its special formula. FLOORTEK is GREENGUARD certificated product that shows the effects of our products on indoor air quality.   DALSAN DALSAN is an ineradicable company almost as old as Turkish Republic, commenced the fabrication of plaster in industrial level for our country that plaster was formerly used as a healthy, durable and material of construction individually since 9000’s B.C. in Anatolia. DALSAN has developed first workshop establishment from fabrication of teeth plaster by baking and pestling them in neighborhood bakery oven, commenced on 1932. Today, DALSAN Alçı has fabrication capacity of more then 1 million ton of gypsum and cement based products by using modern and high technology in facilities location in Gebze and Ankara. Additionally, galvanized profiles used in drywall systems are also fabricated in these facilities. DALSAN increases the share in market by the aim of true and qualified product delivery to customers as well as qualified and honesty based fabrication. DALSAN succeeded to become a constantly learning institution by caring and monitoring tendencies, expectations, different acknowledges of sector. Importance given on learning among structure of company provides a basis to variety of product range and meet demands of consumers effectively. Continuous learning habit dominant in DALSAN accompanied with information and talent constitutes the most important dynamic of a better and eco-friendly fabrication. DALSAN is a manufacturer with high export potential due to its location. Today, DALSAN exports to almost 70 countries in the world from both Gebze and Ankara plants. DALSAN certifies that the goods and services to its customers are supplied with the internationally accepted ISO 9001 Quality Management System. Together with ISO 9001 Quality Management,DALSAN follows and applies ISO 14001 Environmental Management System. Prior aim of DALSAN for the future is, to be on the top of the line in the technological competition made in plaster and plaster board fabrication by developing the fabrication more and more. Under favour of accumulation of knowledge and importance given to research and development studies, we offer all the needs of a construction from floor to roof.  
    View product