UMS Steel Profiles and Accessories
EPD document prepared for UMS Steel Profiles and Accessories with registration number S-P-00869 has been registered and published in EPD Turkey and the International EPD System. Besides, UMS Steel Profiles and Accessories EPD document is registered in ECO Platform with registration number 00000502. Registered EPD document applies to all global markets.
Seranit Porcelain TilesRead moreEPD document prepared for Seranit Porcelain Tiles with registration number S-P-00674 has been registered and published in EPD Turkey and The International EPD System. Besides, Seranit Porcelain Tiles EPD document is registered in ECO Platform with registration number 00000135. Registered EPD document applies to all global markets. Porcelain tiles manufactured by Seranit in Inönü Plant and Bilecek Plant, Turkey and covered under this Environmental Product Declaration are primarily made of naturally occurring major raw materials such as feldspar, clay, and kaolin, but they may also include other minor raw materials such as silica sand and pegmatite. The typical compositions of these products are shown below. Seranit Seranit was established in 1992 as the first “Technical Porcelain” manufacturer of Turkey and has been manufacturing ceramic and 100% porcelain tiles for both interior and exterior application. Seranit adds value to spaces with an innovative approach, rich color, effect and size range, and trend-setting designs. Today, Seranit continues production at their Bilecik Plant with a production capacity of 8.5 million sqm and Inönü/Eskişehir plant with a production capacity of 10 million sqm. Seranit, the first technical porcelain manufacturer of Turkey, is the original producer of many generic brands such as Super White that were created after an in-house R&D and P&D process. Along with standard sizes, Seranit offers 60x60cm and 60x120cm technical porcelain sizes and became the first company to introduce 90x90cm and 90x135cm tiles to the industry in 2007. Aiming to build a better and cleaner world for the next generations, Seranit produces environmentally-friendly products within the framework of an environmentally-friendly management mentality following national and international standards. As a holder of 14001 Environmental Management System Certificate, Seranit fulfills all environmental requirements by using the right raw materials and prioritizing energy efficiency in the production processes.View product
Kaleseramik Kalesinterflex® Porcelain Ceramic SlabRead morethe International EPD System sistemlerinde kayıt altına alınmıştır. Kayıtlı EPD belgesi tüm dünya pazarlarında geçerlidir. Ayrıca, Kaleseramik Kalesinterflex® EPD belgesi ECO Platform’da 00000718 kayıt numarası ile kayıt altına alınmıştır. Kalesinterflex®, porselen seramik levhadır. Temel olarak kil, kaolin ve feldispattan yapılır, ancak diğer hammaddeleri de içermektedir. Kalesinterflex®, perdahlı ve cilalı olarak iki yüzey alternatifine sahiptir. Uygulamaya bağlı olarak, tek başına veya fiberglas lamine desteği olarak kullanılabilir. Kaleseramik Çanakkale Kalebodur Seramik Temelleri 1957 yılında Çanakkale Seramik Fabrikaları A.Ş. ile atılan Kale Grubu, yarım asrı aşan macerasında; Türkiye'de seramik sektörünün kuruluşuna öncülük etmiş, bu alandaki yatırımları ile bir dünya devidir. Her geçen yıl büyüyerek gelişen ve yeni sektörlere yatırım yaparak; makine ve parça imalatı, savunma, kimya, elektrik malzemeleri, enerji, bilişim ve nakliye sektörlerinde de sadece Türkiye'nin değil Avrupa'nın da en önemli ve başarılı guruplarından biridir. Bugün her biri kendi alanlarında lider 17 şirkete sahip, Çanakkale başta olmak üzere Türkiye'nin çeşitli lokasyonlarıyla; İtalya'da fabrika ve marka yatırımları olan, 5.000'i aşkın çalışanı ile faaliyet gösteren Türkiye'nin önemli sanayi kuruluşları arasındadır. Bugün Avrupa'nın 3., dünyanın ise 12. en büyük seramik karo üreticisi, Yapı Kimyasalları sektöründe üretim ve satış kapasitesi olarak Türkiye ve bölgesinin 1., Avrupa'nın ise 5. Şirketidir. Ayrıca %100 özel sermayeli bir Türk şirketi olarak, savunma ve havacılık konusunda uluslararası alanda itibar sahibi bir gruptur. Dünyada 100 ülkede ve 400'ü aşkın noktada Kale markalı ürünleri, tüketicilerle buluşturan şirketler topluluğudur.View product
Polisan Perla Silicone Exterior PaintRead moreEPD document prepared for Polisan Perla Silicone Exterior Paint with registration number S-P-00741 has been registered and published in EPD Turkey and The International EPD System. Registered EPD document applies to all global markets. Silicone-based paint is highly resistant to moisture, alkali, sunlight, rainfall, humidity and salty air. Water repellent. Water vapor permeability allows moisture to discharge. Applicable on all types of concrete, brick, aerated concrete, plaster, brick and other mineral surfaces. Polisan The Polisan brand is widely known in glue and paint sectors. The name is derived from polyvinyl acetate (PVA) glue and the word “sanayi” (Turkish for industry). The founders of the company, the Bitlis family, started commercial operations in the 1920s as a merchandising firm until the establishment of a fabric painting and knitting business called Sark Mensucat. In 1964, they entered the chemicals industry with the foundation of Polisan Chemical, which produced emulsifier resins. In 1985, paint production had begun under the Polisan brand. Polisan Kansai Boya’s most recent paint production and warehouse facility investment, which started in 2016 on 142,000 square meter land in the Gebze Chemicals Specialized Organized Industrial Zone, was completed in June 2018. Having started with a paint production capacity of 10,000 tons/year in 1985, Polisan Kansai Boya now has a capacity of 180,000 tons/year in 3 shifts at the former paint facility, which has now been relocated. Built to International Standards, the fully automated new facility has tripled the annual production capacity, rising it to 180,000 tons/year in a single shift. With the flexibility of working 3 shifts a day, without requiring additional investment spending, the annual production capacity of the new facility can rise to as high as 540,000 tons, which almost matches the size of Turkey’s total decorative market. The new facility was designed in order to receive a “Green Building Certificate” in an attempt to lead the transformation of the market in terms of sustainability and has become the 23rd production facility within Turkey to receive a LEED certification. This fully-automated facility is positioned as a regional production hub by Polisan’s Japanese partner Kansai Paint. Thereby, Polisan Kansai Boya is one step closer to its goal of becoming a global brand. Polisan has ISO 9001, ISO 10001, ISO 14001, ISO 18001, ISO 50001 and ISO 27001 standards certifications. With the renewal of their EPDs, Polisan once again shows its commitment to the environment.View product